Analysis of metallic elements by spectrometry

Verification of compliance of the dimension to meet DIN standard’s level 1 tolerance

Hardness testing of metals and elastomers, according to KING TONY® quality standard (above international standards)

48h long environmental simulation test to control the resistance to rust of the product

Applying a special chemical product to control the thickness of the coating and ensure that it meets with the KING TONY® standard

Failure test to ensure that the maximum applied torque exceed DIN standards

Preparation of hardness samples or metallographic samples

Machines designed for coating metallographic samples with thermosetting resins before polishing

Grinding and polishing, preparing the surface of the metallographic samples after being cut, for microscopic observation

Analyzes the metallographic changes after heat treatment and the hardness difference between the surface and the center

Simulates temperature from 70 ° C to -20 ° C to test the reaction of the product and its resistance to temperature variations

Tensile strength test to comply with DIN standards, especially for assembled parts such as hammers

Tests the life of the hammer and the safety of the assembly of the hammer head on the wooden handle

Test the cutting force of the pliers and their durability

By following DIN ISO & ASME standards, the torque tolerance is tested 3 times:  at 20%, 60% and 100% of the max torque.

Tests the durability of the products that require the application of a low torque, to achieve very accurate tests

Allows visual inspection by image analysis of reliable and automatic measurements on all types of parts

Ensures products are insulated to resist a 1000V voltage

Test the strength of the carton to ensure our packaging’s good quality